PRE-INSULATED PIPES DELTA
DELTA pre-insulated pipes are a safe and efficient solution for the transmission of hot and cold utility water as well as for the distribution of the heating water. They are manufactured in accordance with PN-EN 15632 -1 and 3.
PE foam filling and corrugated polyethylene casing pipe PE-HD makes them flexible and resistant to mechanical damage during installation.
Insulation layer made of chemically cross-linked polyethylene foam of low
air conductivity minimizes heat loss during transfer of the refrigerant. Therefore, this solution is energy efficient and pro-ecological.
DISCOVER ALL ADVANTAGES OF DELTA
Reliable transport of domestic hot water and heating medium to individual networks cooling, for connecting residential houses, to media for biogas plants.
Temperature resistance up to 95 °C, it is possible to use the pipe in many variants heating, with variable heat sources.
Carrier pipe available in diameters from 20 to 125 mm is a complete system with a capacity tailored to the needs of each recipient.
Pipes available in coils in max. 100m section, it is possible to order any length of pipes according to customer’s requirements.
Pressure resistance, both for pipes PEX-a and PE, provides a sense of security use of the pipeline throughout the entire period operation.
Dezincification resistant brass fittings, are approved by the hygienic certificate for the transfer of drinking water.
Resistance to soil pressure and additional sources loads on the backfill surface.
The outstanding service life of the installation is assured by the best components used in production DELTA system, it guarantees peace and comfort use of the pipeline for many years.
A tailor-made solution in the form of a marker, in the future, will facilitate contact with the system producer, in case of the pipeline modification or development needed.
Low value of the thermal conductivity coefficient,
provides measurable savings in the process operation.
The ability to self-compensate for thermal elongations.
Reduction of total assembly costs compared to traditional use pre-insulated pipes.
Ease of assembly
Elbows, sleeves and tees available pre-insulated to perform the necessary connections along the pipeline route allow for quick and easy to install directly in the trench.
Thanks to high flexibility and minimal bending radius from 0.25 to 1.26 m, the use of additional couplings for the obstacle avoiding during the pipeline laying process is not required.
- HEAT DISTRIBUTION NETWORKS LOW TEMPERATURE PN 6/95°C SDR 11
- TRANSPORT OF WARM AND COLD TAP WATER AND DRINKING WATER PN 10/95°C SDR .7.4
- REFRIGERATION SYSTEMS DISTRIBUTION OF CHILLED WATER AND GLYCOL SOLUTIONS
- GEOTHERMAL INSTALLATIONS AS THE DISTRIBUTION OF MEDIUM FOR GROUND COLLECTORS
- TECHNOLOGICAL NETWORKS IN FOOD AND CHEMICAL INDUSTRIES
Delta pex sani uno pn 10/95 ° c sdr 7.4 single pipe
Single pre-insulated pipe intended for the transmission of cold or hot utility water (domestic hot water, domestic hot water)
- PN 10/95 ° C SDR 7.4
- high flexibility of the pipe
- excellent insulation parameters
- tube available in coils up to 100m
Pre-insulated pipe structure:
- internal service pipe made of PEX-A cross-linked polyethylene
- insulating layer made of flexible PE foam
- double-wall corrugated casing pipe, made of PEHD polyethylene
|Designation OD pipe/OD casing [mm]||OD carrier pipe x wall thickness [mm]||Weight [kg/m]||Material||Catalog number|
|25/110||25x3.5||0.91||PEX-a / PE / PE-HD||710 110 025|
|32/110||32x4.4||1.12||PEX-a / PE / PE-HD||710 110 032|
|40/110||40x5.5||1.32||PEX-a / PE / PE-HD||710 110 040|
|50/160||50x6.9||2.52||PEX-a / PE / PE-HD||710 160 050|
|63/160||63x8.6||3.04||PEX-a / PE / PE-HD||710 160 063|
|75/160||75x10.3||3.4||PEX-a / PE / PE-HD||710 160 075|
|90/200||90x12.3||4.39||PEX-a / PE / PE-HD||710 200 090|
|110/200||110x15.1||5.29||PEX-a / PE / PE-HD||710 200 110|
Properties of the PEX-A line pipe
PEX line pipes are made of specially selected material in accordance with PN-EN ISO 15875 -1, 2 and 5. During production, the material is extruded under high pressure and high temperature in the presence of a chemical catalyst. The cross-linking process was also used in accordance with the ISO 10147 standard, which results in the formation of unbreakable 3D mesh-shaped connections, thanks to which the pipe behaves like a single molecule. The pipe for transfer of the heating medium has an additional external EVOH anti-diffusion coating made in accordance with DIN 4726
Advantages of PEX polyethylene:
• temperature resistance
in the range of -50 ° C / + 95 ° C
• corrosion resistance
• exceptional mechanical resistance
• unique chemical resistance
• very long service life
• resistance to the phenomenon of encrustation and thus to reduce the flow